Aerocheck 2 / + Eddy Current Flaw Detector
Sale ✓
The AeroCheck Flaw Detector offers the very best in Eddy Current performance with rotary inspection capabilities as standard.
Weighing just 1.2kg (2.7lbs), housed in a tough aluminium alloy Mg Si 0.5 powder-coated
outer case and fitted with rubber feet to aid grip, the AeroCheck is as stable on a wing of
an aircraft as it is on a laboratory bench.
- Advanced features including Conductivity & Auto-mix, Loop, Guides and Trace
- Large, crisp, daylight readable display
- User-friendly interface and ergonomic lightweight design
- Rotary capabilities as standard
- Over 7 hours battery life
- Rapid 2.5 Hour charging time
- Two-year warranty
Rotary Capabilities As Standard
The AeroCheck series includes rotary capabilities as
standard and can be used with the ETher Mercury
(mini) ARD002, Hocking 33A100 or the Rohmann
MR3/SR1 and SR2 Drives (with special adapter cable).
Daylight Visible Large Colour Screen
The WeldCheck has a fully daylight readable 14.5cm LCD Colour Screen of 640 x 480 pixels ensuring the Operator has excellent signal resolution and presentation no matter what the working conditions are. The operator has the choice of configuring their own colour schemes and display types. This will optimise their viewing ability of the screen in any light conditions. It is possible to view the readings in a choice of spot, time-base, waterfall or meter display types.
Industry Standard Connectors
The AeroCheck series uses a wide range of eddy current probes meeting all the needs of the
Aerospace Eddy Current Inspector. Absolute, bridge and reflection connected probes can use the
industry standard 12 Way LEMO Connector. A LEMO 00 Connector is also provided for simpler
connection of absolute probes.
Easy Icon System
In order to allow the operator to configure the instrument for ease of use there is a system of operator-selectable soft keys. Every menu item has its own easily recognisable icon. There are four soft key positions for operator selectable icons for frequently used functions and a fifth position for the last menu function used. Each saved instrument setting can be associated with a unique, one press set of quick access functions. There are also two front panel hard keys that can also be easily programmed for rapid one press access to instrument functions.
Works the way you do!
The AeroCheck series has the ability to be used in
left and right-handed mode; thanks to the “Auto Flip”
function. This is especially useful if the operator is
inspecting in a restricted area like the Engine Mounts.
Record and Replay
Up to 164 seconds of live data may be recorded in real-time and then played back
either on the instrument or on a PC, using the desktop application ETherAnalyser for
subsequent analysis and review. The recorded data may be further optimised by
adjusting many settings including Phase, Gain, Filters, Display and Spot position.
Available with the AeroCheck + Upgrade
Conductivity Measurement
When connecting the Conductivity Probe, the WeldCheck+ auto-detects the probe and seamlessly switches into conductivity mode. Removal of the probe switches the instrument back to flaw detection mode. NB: The Conductivity Measurement Option is available through the purchase of the KACON001 KIT.
Dual Frequency/Channel Feature
At different frequencies, different signal indications (e.g. lift off and defect) have a different relative phase and amplitude response. By means of Phase rotation and Gain change of the X Y signal components one of these indications can be manipulated to be almost identical in phase and amplitude as the other and then by subtraction (mixing), the unwanted component is minimised, giving an improved detection of the required signal.
